Gross Profit, Operating Income, and Net Income as a percentage of Revenue

Gross Margin

Operating Margin

Profit Margin

Margins

An operating expense is an expense a business incurs through its normal business operations. Often abbreviated as OPEX.

Research and development

Selling and marketing

General and administrative

Operating Expenses

Year over year growth in Revenue and Operating Expenses.

Revenue Y/Y

OpEx Y/Y

Growth

Shares outstanding refer to a company's stock currently held by all its shareholders, including share blocks held by institutional investors and restricted shares owned by the company's officers and insiders.

Outstanding Shares

Market Cap

Also known as Price/Sales Ratio. Calculated using Average market cap for the quarter / Annualized quarterly revenue.

Revenue Multiple

Velo3D

Velo3D, Inc. develops and manufactures metal laser sintering printing machines for 3D printing. Its products include assure system, flow software, sapphire printer, sapphire XC, and SupportFree process. The company was founded by Benyamin Buller in June 2014 and is headquartered Campbell, CA.

Earnings data Q3 2021

Earnings data Q4 2021

Earnings data Q1 2022

Earnings data Q2 2022

Earnings data Q3 2022

Earnings data Q4 2022

Earnings data Q1 2023

Earnings data Q2 2023

Earnings data Q3 2023

Earnings data Q4 2023

Earnings data Q1 2024

Earnings data Q2 2024

Earnings data Q3 2024

Velo3D reports stellar Q4 performance, eyes growth and efficiency

Velo3D's Q4 2022 earnings call showcased impressive financial performance, strategic focus on growth and profitability, and a commitment to operational excellence.
The company's strong revenue growth, margin expansion targets, and prudent cost management strategies position them well for future success and sustained growth in 2023 and beyond.
While challenges like margin improvement and cost control exist, Velo3D's solid balance sheet, revenue outlook, and market opportunities indicate a promising outlook for investors and stakeholders.

Velo3D doubles revenue in Q1, eyes profitability by year-end

Velo3D's Q1 performance reflects robust revenue growth and progress towards profitability, supported by operational enhancements and strong demand.
While facing challenges such as declining recurring revenue, the company is poised for significant growth opportunities in revenue and margin improvement.
Strategic initiatives and market confidence position Velo3D to achieve profitability by the end of 2023 through revenue expansion and cost optimization.

Velo3D reports strong revenue growth but revises guidance downward

Velo3D's Q2 performance showed revenue growth but faced challenges with bookings delays, leading to revised revenue guidance for FY 2023.
The company's strengths lie in its market leadership, strong customer base, and strategic liquidity enhancement through a successful offering.
Challenges include booking delays, margin improvement needs, and achieving profitability amidst operational losses.
Opportunities exist for Velo3D to leverage its market position, drive revenue growth, improve margins, and enhance profitability through operational efficiency.

Velo3D focuses on cash flow optimization amidst revenue challenges

Velo3D's Q3 2023 earnings call highlighted a shift towards optimizing free cash flow, with revenue growth tempered by operational challenges. The company aims to achieve breakeven in Q2 2024 through expense reduction and realignment strategies for profitability in 2024.

Velo3D faces Q4 challenges but sees growth opportunities in 2024

Velo3D's Q4 2023 was challenging but showed resilience in overcoming obstacles through cost reduction, cash flow improvement, and backlog rebuilding. The company's focus on existing customer relationships, new revenue streams, and strategic financial goals for 2024 positions it for long-term success and growth.

Velo3D reports revenue growth and aims for profitability in 2024

Velo3D's Q1 2024 earnings call highlighted positive performance metrics, including revenue growth and increased bookings. The company aims to achieve cash flow breakeven by year-end and expects over 30% sequential revenue growth in Q2. Challenges include a negative gross margin in Q1, but opportunities lie in expanding customer base and achieving sustainable profitability.

Revenue

Cost of revenue

Gross profit

Operating expenses

SG&A

Other

Operating income

EBITDA

Net income

Earnings per share

Total assets

Current assets

Cash & equivalents

Receivables

Inventory

Non-current assets

Net PPE

Intangibles

Total liabilities

Current liabilities

Short term debt

Income tax payable

Non-current liabilities

Long-term debt

Total equity

Stockholders equity

Minority interest

Total liabilities & equity

Total debt

Net debt

Book value per share

Cash from operations

Funds from operations

Change in working capital

Cash from investing

Capital expenditure

Purchase/sale of investments

Purchase/sale of business

Other sources

Cash from financing

Change in stock

Change in debt

Cash dividends paid

Cash from other sources

Net change in cash

Free cash flow

Velo3D, Inc. operates as a technology company, which engages in developing and manufacturing metal laser sintering printing machines for 3D printing. Its products include assure system, flow software, sapphire printer, sapphire XC, and SupportFree process. The company was founded by Benyamin Buller in June 2014 and is headquartered in Fremont, CA.

NEW YORK--(BUSINESS WIRE)--The New York Stock Exchange (“NYSE”, the “Exchange”) announced today that the staff of NYSE Regulation has determined to commence proceedings to delist the two securities enumerated below (“Securities”) of Velo3D, Inc. (the “Company”) from the NYSE. Trading in the Company's Securities will be suspended immediately. Symbol Description VLD Common stock, par value $0.00001 per share VLD WS Warrants to purchase one share of common stock, each at an exercise price of $402.

NYSE to Commence Delisting Proceedings Against Velo3D, Inc. (VLD)

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D Welcomes Back Dr. Zach Murphree as Vice President, General Manager to Lead its Product Development and Customer-first Go-to-market Strategy.

ADDING MULTIMEDIA Velo3D Welcomes Back Dr. Zach Murphree as Vice President, General Manager to Lead Its Product Development and Customer-first Go-to-market Strategy

Velo3D Welcomes Back Dr. Zach Murphree as Vice President, General Manager to Lead Its Product Development and Customer-first Go-to-market Strategy

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced that the National Institute for Aviation Research (NIAR) has purchased a Sapphire 1MZ printer to develop performance-based qualification methods of metal 3D-printed parts for airframe applications. The Sapphire 1MZ printer will be configured to produce parts in Inconel 718, a durable nickel-based alloy that provides high corrosion, oxi.

The National Institute for Aviation Research to Leverage Velo3D's Additive Manufacturing Solution to Produce Next-generation Airframe Technologies

Array Technologies

Hyzon Motors

The most oversold stocks in the industrials sector presents an opportunity to buy into undervalued companies.

Top 3 Industrials Stocks That May Rocket Higher This Month

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced financial results for its second quarter ended June 30, 2024. “Our second quarter results reflected continued execution on our strategic priorities as we added to our year-to-date bookings, maintained a healthy backlog and reduced our operating expenses,” said Brad Kreger, CEO of Velo3D. “Specifically, we continued to expand our defens.

Velo3D Announces Second Quarter 2024 Financial Results

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced that on July 8, 2024 it received notice from the New York Stock Exchange (“NYSE”) that it is not in compliance with Section 802.01B of the NYSE Listed Company Manual because its average total market capitalization over a consecutive 30 trading-day period was less than $50 million and, at the same time, its stockholders' equity was less.

Velo3D, Inc. Receives Continued Listing Standards Notice from the NYSE

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading metal additive manufacturing technology company for mission-critical parts, today announced Mears Machine Corporation, a leader in precision machining solutions, has acquired a Sapphire XC printer to bolster its additive manufacturing capabilities. This strategic investment underscores Mears Machine's commitment to adopting advanced manufacturing technologies and follows the previous purchase of two Velo3D Sapphire XCs announ.

Mears Machine Enhances Its Additive Manufacturing Capabilities With the Purchase of Its Third Velo3D Sapphire XC Metal 3D Printer

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced that its Board of Directors has formally appointed Brad Kreger, who has been serving as the company's Interim Chief Executive Officer since December 2023, as the company's permanent Chief Executive Officer. The Board of Directors cited the success of Velo3D's re-alignment initiatives under Mr. Kreger as well as his implementation of st.

Brad Kreger Formally Appointed as Permanent Chief Executive Officer at Velo3D

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) (the “Company” or “Velo3D”), a leading metal additive manufacturing technology company for mission-critical parts, today announced that its board of directors has approved a 1-for-35 reverse stock split of the Company's common stock. The common stock will open for trading on the New York Stock Exchange (“NYSE”) on Thursday, June 13, 2024, on a split-adjusted basis under the current trading symbol “VLD”. In connection with the reverse s.

Velo3D, Inc. Announces Reverse Stock Split

Velo3D, Inc. (NYSE:VLD ) Q1 2024 Earnings Conference Call May 15, 2024 5:00 PM ET Company Participants Bob Okunski - Vice President, Investor Relations Brad Kreger - Chief Executive Officer Hull Xu - Chief Financial Officer Conference Call Participants James Ricchiuti - Needham & Company Matthew Cross - Alliance Global Partners Operator Good afternoon. Welcome to the Velo3D First Quarter 2024 Earnings Conference Call.

Velo3D, Inc. (VLD) Q1 2024 Earnings Call Transcript

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D Announces First Quarter 2024 Financial Results.

Velo3D Announces First Quarter 2024 Financial Results

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) — a leading additive manufacturing technology company for mission-critical metal parts, announced today that it will release its first quarter 2024 financial results after the market close on Wednesday, May 15, 2024. The company will host an earnings conference call and webcast to discuss its financial results at 2:00 p.m. Pacific Time / 5:00 p.m. Eastern Time the same day. The U.S. dial-in for the call is (877) 704-2771 and (201) 689-8.

Velo3D to Announce First-Quarter Results on May 15, 2024

CAMPBELL, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) (the “Company” or “Velo3D”), a leading metal additive manufacturing technology company for mission-critical parts, today announced changes to its leadership structure as well as that its re-alignment initiatives to maximize cash flow and operational efficiency remain on plan. The Company has appointed Hull Xu as its new Chief Financial Officer, replacing acting CFO Bernard Chung, who will leave the Company on April 29, 2024 following t.

Velo3D, Inc. Announces Executive Leadership Changes

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) (the “Company”), a leading additive manufacturing technology company for mission-critical metal parts, today announced the closing of its previously announced “reasonable best efforts” public offering of 34,285,715 shares of common stock and warrants to purchase up to 34,285,715 shares of common stock at an offering price of $0.35 per share and accompanying warrant for aggregate gross proceeds of approximately $12 million, before deduct.

Velo3D Announces Closing of $12 Million Public Offering

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced the appointment of Nancy Krystal as Vice President, General Counsel to oversee all legal matters for the company. With over 16 dynamic years of experience in corporate law, Nancy brings a wealth of experience in navigating complex legal landscapes and spearheading pivotal deals to her new role at Velo3D. "Nancy's extensive legal expert.

Nancy Krystal Joins Velo3D as Vice President, General Counsel

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) (the “Company”), a leading additive manufacturing technology company for mission-critical metal parts, today announced the pricing of its previously announced “reasonable best efforts” public offering of 34,285,715 shares of common stock and warrants to purchase up to 34,285,715 shares of common stock. The securities were sold to new and existing institutional investors at an offering price of $0.35 per share and accompanying warrant fo.

Velo3D Announces Pricing of $12 Million Public Offering

Velo3D (NYSE: VLD ) stock is dropping on Wednesday after the metal 3D printing company announced plans for a proposed public offering of its shares. Investors will note that Velo3D doesn't have the fine details of the public offering ready just yet.

Why Is Velo3D (VLD) Stock Down 23% Today?

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) (the “Company”), a leading additive manufacturing technology company for mission-critical metal parts, today announced that it intends to offer and sell shares of its common stock and warrants to purchase shares of its common stock in a “reasonable best efforts” public offering. All of the securities to be sold in the offering are to be offered by Velo3D, Inc. The offering is subject to market conditions, and there can be no assurance a.

Velo3D Announces Proposed Public Offering

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced it has received purchase orders totaling $27 million since mid-December 2023. These orders include the purchase of 2 Sapphire XC systems by Mears Machine, a leading global contract manufacturer, where the systems will be dedicated to supplying parts for their defense and aerospace initiatives. The company ended the first quarter of 202.

Velo3D Announces Bookings Totaling $27 Million Since Mid-December – Backlog Now Totals $23 Million

Velo3D (NYSE: VLD ) stock is falling on Wednesday following the release of the 3D printing company's Q4 2023 earnings report. Velo3D starts its earnings reported with adjusted losses per share of 29 cents.

Why Is Velo3D (VLD) Stock Down 34% Today?

Velo3D, Inc. (VLD) Q4 2023 Earnings Call Transcript

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD), a leading additive manufacturing technology company for mission-critical metal parts, today announced financial results for its fourth quarter and fiscal year 2023 ended December 31, 2023. “2023 was a transformational year for the company as we re-aligned our strategic and business priorities from driving revenue growth to ensuring customer success, improving system reliability and materially reducing our cost structure,” said Brad Kre.

Velo3D Announces Fourth Quarter and Fiscal Year 2023 Financial Results

Digital Ally Inc

High Tide

Fusion Fuel Green

Iteris

Navitas Semiconductor Corp

Taseko Mines

Penny growth stocks are all the rage for investors seeking explosive returns. With the market cycle potentially shifting and the Federal Reserve poised to cut interest rates up to three times this year, now could be an opportune time to grab some neglected penny stocks before they take off.

7 Unknown Penny Growth Stocks That Are About to Pop 1,000%

FREMONT, Calif.--(BUSINESS WIRE)--Velo3D, Inc. (NYSE: VLD) — a leading additive manufacturing technology company for mission-critical metal parts, announced today that it will release its fourth quarter and fiscal year 2023 financial results after the market close on Tuesday, March 26, 2024. The company will host an earnings conference call and webcast to discuss its financial results at 2:00 p.m. Pacific Time / 5:00 p.m. Eastern Time the same day. The U.S. dial-in for the call is (877) 704-277.

News for Velo3D Stock (VLD)